Komatsu water pump
- Interchanges
- 3800322 · 4096427 +1
- Engine
- 12V140
Photos of the actual unit — the same pump we measure and pack.
6124-61-1004 is the Komatsu OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
This pump was designed for 6D155; D155A1.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 6124-61-1004 |
| Fits brand | Komatsu |
| TO Shaft head height | 204.5 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 17.7 |
| TO Gear height | 174 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 23 |
| Included Component 1 | O146.6X5.3 |
| Net weight | 24.50 kg |
| Packing | 1 pcs/ctn, 27.50 kg gross |
Logistics data: 1 pcs/ctn, 27.50 kg gross, 60 x 30 x 28 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 6124-61-1004 fit?
6124-61-1004 fits 6D155 and D155A1 engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
How much does the 6124-61-1004 water pump weigh?
One pump weighs 24.50 kg net. A full carton of 1 piece comes to 27.50 kg gross.
What should I check before replacing the 6124-61-1004 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 6124-61-1004 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.