Komatsu water pump
- Interchanges
- 6131-62-1240 · 6140-60-1110
- Engine
- 4D105-3
Photos of the actual unit — the same pump we measure and pack.
If your parts book shows 6151-62-1104, you need a water pump for S6D125, PC200-5 and other listed engines. Ours is a matching replacement — same mounting holes, same belt pulley height, pressure-tested before packing. Related OE numbers include 6150-61-1101, 6151-61-1101, 6151-61-1121, 6154-61-1102.
This pump was designed for S6D125; PC200-5; PC300-3; PC400-5.
Any engine on this list takes our replacement as a straight swap.
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
| Parameter | Value |
|---|---|
| OE number | 6151-62-1104 |
| Fits brand | Komatsu |
| TO Shaft head height | 160.6 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 7-M10X1.5 |
| TO Gear height | 157.4 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 22 |
| Included Component 1 | O120X3.1-3 |
| Net weight | 9.50 kg |
| Packing | 2 pcs/ctn, 20.60 kg gross |
For shipping estimates, count on 2 pumps per carton (20.60 kg, 51.5 x 29 x 26 cm).
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 6151-62-1104 fit?
6151-62-1104 fits S6D125, PC200-5 and other listed engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6151-62-1104?
6151-62-1104 interchanges with 6150-61-1101, 6151-61-1101, 6151-61-1121, 6154-61-1102. All of these refer to the same water pump assembly.
How much does the 6151-62-1104 water pump weigh?
One pump weighs 9.50 kg net. A full carton of 2 pieces comes to 20.60 kg gross.
What should I check before replacing the 6151-62-1104 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.