Photos of the actual unit — the same pump we measure and pack.
6150-61-1101 Water Pump — Komatsu Replacement
The OE number 6150-61-1101 identifies a water pump fitted to S6D125, PC200-5 and other listed engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 9.50 kg; a full carton holds 2.
Which engines use the 6150-61-1101 water pump?
Fitment covers S6D125; PC200-5; PC300-3; PC400-5.
Any engine on this list takes our replacement as a straight swap.
What part numbers interchange with 6150-61-1101?
One pump, many part numbers. The full cross list:
What are the specifications of 6150-61-1101?
| Parameter | Value |
|---|---|
| OE number | 6150-61-1101 |
| Fits brand | Komatsu |
| TO Shaft head height | 160.6 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 7-M10X1.5 |
| TO Gear height | 157.4 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 22 |
| Included Component 1 | O120X3.1-3 |
| Net weight | 9.50 kg |
| Packing | 2 pcs/ctn, 20.60 kg gross |
Packing and quality checks
For shipping estimates, count on 2 pumps per carton (20.60 kg, 51.5 x 29 x 26 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
Frequently asked questions
What vehicles or engines does 6150-61-1101 fit?
6150-61-1101 fits S6D125, PC200-5 and other listed engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6150-61-1101?
6150-61-1101 interchanges with 6151-61-1101, 6151-61-1121, 6151-62-1104, 6154-61-1102. All of these refer to the same water pump assembly.
How much does the 6150-61-1101 water pump weigh?
One pump weighs 9.50 kg net. A full carton of 2 pieces comes to 20.60 kg gross.
What should I check before replacing the 6150-61-1101 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The same four checks, every unit
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
Price this pump
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
- Sales desksales@hanchitradecn.com
- Trade deskBased in China, shipping worldwide
- Working hoursMon – Sat, 08:30 – 18:00 (GMT+8)
What comes back with the quote
- Unit price for OE 6150-61-1101 and any mixed items
- MOQ, carton data and container loading plan
- Photos of the actual unit before packing
- Lead time and suggested shipping method
Email us about OE 6150-61-1101
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.
- OE number(s) — a plain list is fine
- Quantity per item
- Destination port or country
- Packing, branding or target-price notes