Komatsu water pump
- Interchanges
- 3800322 · 4090031PX +1
- Engine
- 12V140
Photos of the actual unit — the same pump we measure and pack.
6202-63-1200 is the Komatsu OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
You will find this pump on Komatsu 4D95S; CP00-017.
Match your engine model to the list and the pump will fit without rework.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 6202-63-1200 |
| Fits brand | Komatsu |
| Mounting hole position | Aligned to OE mounting points |
| TO Flange height | 113.5 |
| Impeller Diameter | 79.7 |
| TO Impeller height Ⅰ | 0.5 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Flange thread | M8X1.25 |
| Net weight | 2.55 kg |
| Packing | 4 pcs/ctn, 12.20 kg gross |
Packing runs 4 pumps per carton, 12.20 kg gross weight, carton size 58 x 44 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 6202-63-1200 fit?
6202-63-1200 fits Komatsu 4D95S and CP00-017 engines. It is a Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6202-63-1200?
6202-63-1200 interchanges with 6202-63-1401, J351-0009C. All of these refer to the same water pump assembly.
How much does the 6202-63-1200 water pump weigh?
One pump weighs 2.55 kg net. A full carton of 4 pieces comes to 12.20 kg gross.
What should I check before replacing the 6202-63-1200 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.