Cummins water pump
- Interchanges
- 3964792 · 4089952 +6
- Engine
- PC350-8
Photos of the actual unit — the same pump we measure and pack.
Looking for 6275-61-1100? It is the Cummins; Komatsu OE reference for a cooling water pump used on QSB3.3 and 4D95-6 engines. The replacement we supply keeps the same fit and pulley dimensions. Net weight 6.90 kg, packed 2 per carton.
This pump was designed for QSB3.3; 4D95-6.
Any engine on this list takes our replacement as a straight swap.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 6275-61-1100 |
| Fits brand | Cummins; Komatsu |
| TO Belt pulley height | 124.5 |
| TO Shaft head height | 148.5 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 18.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O48X3.5 |
| Net weight | 6.90 kg |
| Packing | 2 pcs/ctn, 16.00 kg gross |
Logistics data: 2 pcs/ctn, 16.00 kg gross, 43.5 x 30 x 21 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 6275-61-1100 fit?
6275-61-1100 fits QSB3.3 and 4D95-6 engines. It is a Cummins; Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 6275-61-1100?
6275-61-1100 interchanges with 4309267, 5271093, J250-0072C. All of these refer to the same water pump assembly.
How much does the 6275-61-1100 water pump weigh?
One pump weighs 6.90 kg net. A full carton of 2 pieces comes to 16.00 kg gross.
What should I check before replacing the 6275-61-1100 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.