Cummins water pump
- Interchanges
- 3282677 · 3802004 +3
- Engine
- FD 1060
Photos of the actual unit — the same pump we measure and pack.
5271093 belongs to the Cummins; Komatsu cooling system parts family. The pump sits on QSB3.3 and 4D95-6 engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 4309267, 6275-61-1100, J250-0072C.
You will find this pump on QSB3.3; 4D95-6.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 5271093 |
| Fits brand | Cummins; Komatsu |
| TO Belt pulley height | 124.5 |
| TO Shaft head height | 148.5 |
| Pulley Jumping | 0.07 |
| Mounting hole position | Aligned to OE mounting points |
| TO Impeller height Ⅰ | 18.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Included Component 1 | O48X3.5 |
| Net weight | 6.90 kg |
| Packing | 2 pcs/ctn, 16.00 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
Each pump is packed individually; a master carton holds 2 pieces at 16.00 kg gross.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 5271093 fit?
5271093 fits QSB3.3 and 4D95-6 engines. It is a Cummins; Komatsu application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 5271093?
5271093 interchanges with 4309267, 6275-61-1100, J250-0072C. All of these refer to the same water pump assembly.
How much does the 5271093 water pump weigh?
One pump weighs 6.90 kg net. A full carton of 2 pieces comes to 16.00 kg gross.
What should I check before replacing the 5271093 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.