Deutz water pump
- Interchanges
- 04135550 · 04137233 +3
- Engine
- TD2.9L4,TCD2.9 L4
Photos of the actual unit — the same pump we measure and pack.
04258805 is how DEUTZ lists this water pump. The same pump shows up as 02937440, 04206747, 04256853, 04259547, 04259548 and 3 more in other catalogs.
You will find this pump on BF4M1013; BF6M103; DEUTZ 1013 parts; bf6m1013.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 04258805 |
| Fits brand | DEUTZ |
| TO Shaft head height | 142 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | M16X1.5 |
| Flange thread | 4-M8X1.25 |
| TO Flange height | 132.8 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 0.4 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 5.60 kg |
| Packing | 2 pcs/ctn, 13.20 kg gross |
Depending on the catalog you use, the same pump shows up as:
Packing runs 2 pumps per carton, 13.20 kg gross weight, carton size 43.5 x 30 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 04258805 fit?
04258805 fits BF4M1013, BF6M103 and other listed engines. It is a DEUTZ application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 04258805?
04258805 interchanges with 02937440, 04206747, 04256853, 04259547, 04259548, 20726077 and 2 more. All of these refer to the same water pump assembly.
How much does the 04258805 water pump weigh?
One pump weighs 5.60 kg net. A full carton of 2 pieces comes to 13.20 kg gross.
What should I check before replacing the 04258805 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.