Hino water pump
- Interchanges
- 16100-2304 · 16100-2753 +2
- Engine
- EP100
Photos of the actual unit — the same pump we measure and pack.
16100-3112 is a Hino water pump OE number. Our replacement matches the same mounting and cooling specs, fits K13C engines, and ships with a 12.20 kg net weight (1 pcs per carton). Cross numbers: 16100-3086, 16100-3122, 16100-3123.
Fitment covers K13C.
Match your engine model to the list and the pump will fit without rework.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 16100-3112 |
| Fits brand | Hino |
| TO Shaft head height | 73.8 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 2-M8X1.25 |
| TO Impeller height Ⅰ | 0.5 |
| TO Gear height | 56 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 22 |
| Included Component 1 | O135X5-3 |
| Net weight | 12.20 kg |
| Packing | 1 pcs/ctn, 13.50 kg gross |
For shipping estimates, count on 1 pumps per carton (13.50 kg, 38 x 30 x 21 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 16100-3112 fit?
16100-3112 fits K13C engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-3112?
16100-3112 interchanges with 16100-3086, 16100-3122, 16100-3123. All of these refer to the same water pump assembly.
How much does the 16100-3112 water pump weigh?
One pump weighs 12.20 kg net. A full carton of 1 piece comes to 13.50 kg gross.
What should I check before replacing the 16100-3112 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.