Hino water pump
- Interchanges
- 16100-0070 · 16100-4290
- Engine
- J08E-EX
Photos of the actual unit — the same pump we measure and pack.
16100-3123 is the Hino OE reference for this cooling water pump. One pump weighs 13.55 kg net; match the number against your old pump or parts book before ordering.
This pump was designed for EK200; EK100/K13C; 1987~; K13D.
If your engine tag matches any entry above, this pump is the right replacement.
| Parameter | Value |
|---|---|
| OE number | 16100-3123 |
| Fits brand | Hino |
| TO Shaft head height | 73.8 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | ZG1/2 |
| TO Impeller height Ⅰ | 0.5 |
| TO Gear height | 56 |
| Installation of water pipes | Water pipe fitted complete, no deformation |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Number of Teeth | 22 |
| Included Component 1 | O135X5-3 |
| Net weight | 13.55 kg |
| Packing | 1 pcs/ctn, 14.80 kg gross |
Depending on the catalog you use, the same pump shows up as:
Logistics data: 1 pcs/ctn, 14.80 kg gross, 38 x 30 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 16100-3123 fit?
16100-3123 fits EK200, EK100/K13C and other listed engines. It is a Hino application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 16100-3123?
16100-3123 interchanges with 16100-3112, 16100-3122. All of these refer to the same water pump assembly.
How much does the 16100-3123 water pump weigh?
One pump weighs 13.55 kg net. A full carton of 1 piece comes to 14.80 kg gross.
What should I check before replacing the 16100-3123 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.