Cummins water pump
- Interchanges
- 5271093 · 6275-61-1100 +1
- Engine
- QSB3.3
Photos of the actual unit — the same pump we measure and pack.
3882670 is a Cummins water pump OE number. Our replacement matches the same mounting and cooling specs and ships with a 11.20 kg net weight (1 pcs per carton). Cross numbers: 2882144, 3800737, 3803260, 3803403, 4955705 and 3 more.
You will find this pump on QSM ISM M11.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 3882670 |
| Fits brand | Cummins |
| TO Shaft head height | 66.1 |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 159.5 |
| TO Impeller height Ⅰ | 12.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 11.20 kg |
| Packing | 1 pcs/ctn, 13.00 kg gross |
Packing runs 1 pumps per carton, 13.00 kg gross weight, carton size 37 x 32 x 27 cm.
Before boxing, each pump passes a negative-pressure leak check and a hand-rotation check for smooth, noise-free bearing movement.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 3882670 fit?
3882670 fits QSM ISM M11 engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 3882670?
3882670 interchanges with 2882144, 3800737, 3803260, 3803403, 4955705, 4965430 and 2 more. All of these refer to the same water pump assembly.
How much does the 3882670 water pump weigh?
One pump weighs 11.20 kg net. A full carton of 1 piece comes to 13.00 kg gross.
What should I check before replacing the 3882670 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.