Cummins water pump
- Interchanges
- 3357458 · 3966841 +2
- Engine
- 6CT
Photos of the actual unit — the same pump we measure and pack.
4955705 is a Cummins water pump OE number. Our replacement matches the same mounting and cooling specs and ships with a 11.20 kg net weight (1 pcs per carton). Cross numbers: 2882144, 3800737, 3803260, 3803403, 3882670 and 3 more.
You will find this pump on QSM ISM M11.
Any engine on this list takes our replacement as a straight swap.
| Parameter | Value |
|---|---|
| OE number | 4955705 |
| Fits brand | Cummins |
| TO Shaft head height | 66.1 |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 159.5 |
| TO Impeller height Ⅰ | 12.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 11.20 kg |
| Packing | 1 pcs/ctn, 13.00 kg gross |
Dealers and fleet systems quote this pump under more than one OE number:
Logistics data: 1 pcs/ctn, 13.00 kg gross, 37 x 32 x 27 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 4955705 fit?
4955705 fits QSM ISM M11 engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 4955705?
4955705 interchanges with 2882144, 3800737, 3803260, 3803403, 3882670, 4965430 and 2 more. All of these refer to the same water pump assembly.
How much does the 4955705 water pump weigh?
One pump weighs 11.20 kg net. A full carton of 1 piece comes to 13.00 kg gross.
What should I check before replacing the 4955705 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.