Cummins water pump
- Interchanges
- 3964792 · 3973116 +6
- Engine
- PC350-8
Photos of the actual unit — the same pump we measure and pack.
4965430 belongs to the Cummins cooling system parts family. The pump sits on QSM ISM M11 engines. Our aftermarket equivalent follows the OE dimensions and passes air-tightness testing at 0.1 MPa negative pressure. It also replaces 2882144, 3800737, 3803260, 3803403, 3882670 and 3 more.
This pump was designed for QSM ISM M11.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 4965430 |
| Fits brand | Cummins |
| TO Shaft head height | 66.1 |
| Mounting hole position | Aligned to OE mounting points |
| TO Gear height | 159.5 |
| TO Impeller height Ⅰ | 12.2 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 11.20 kg |
| Packing | 1 pcs/ctn, 13.00 kg gross |
Parts books from different markets list this pump under several numbers. All of them point to the same unit:
Logistics data: 1 pcs/ctn, 13.00 kg gross, 37 x 32 x 27 cm.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
A hand-rotation check closes out the inspection: the shaft must turn smoothly and quietly.
What vehicles or engines does 4965430 fit?
4965430 fits QSM ISM M11 engines. It is a Cummins application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 4965430?
4965430 interchanges with 2882144, 3800737, 3803260, 3803403, 3882670, 4955705 and 2 more. All of these refer to the same water pump assembly.
How much does the 4965430 water pump weigh?
One pump weighs 11.20 kg net. A full carton of 1 piece comes to 13.00 kg gross.
What should I check before replacing the 4965430 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.