Fiat water pump
- Interchanges
- 4603885 · 4616667 +10
- Engine
- FPT ARO 244
Photos of the actual unit — the same pump we measure and pack.
4655010 is the Fiat; IVECO OE number for this cooling water pump. Match it against the number on your old pump or in the parts book — our replacement follows the OE dimensions.
You will find this pump on FPT ARO 244; IVECO; 100EC-100NC-110NC.
If your engine tag matches any entry above, this pump is the right replacement.
Dealers and fleet systems quote this pump under more than one OE number:
| Parameter | Value |
|---|---|
| OE number | 4655010 |
| Fits brand | Fiat; IVECO |
| TO Shaft head height | 149 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M8X1.25 |
| Flange thread | 3-M8X1.25 |
| TO Flange height | 126.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.42 kg |
| Packing | 4 pcs/ctn, 19.70 kg gross |
Packing runs 4 pumps per carton, 19.70 kg gross weight, carton size 41 x 36 x 19.5 cm.
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 4655010 fit?
4655010 fits FPT ARO 244, IVECO and other listed engines. It is a Fiat; IVECO application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 4655010?
4655010 interchanges with 4603885, 4616667, 4639182, 46545010, 4655050, 4655054 and 6 more. All of these refer to the same water pump assembly.
How much does the 4655010 water pump weigh?
One pump weighs 4.42 kg net. A full carton of 4 pieces comes to 19.70 kg gross.
What should I check before replacing the 4655010 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.