Fiat water pump
- Interchanges
- 4603885 · 4616667 +10
- Engine
- FPT ARO 244
Photos of the actual unit — the same pump we measure and pack.
The OE number 4655118 identifies a water pump fitted to FPT ARO 244, IVECO and other listed engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 4.42 kg; a full carton holds 4.
You will find this pump on FPT ARO 244; IVECO; 100EC-100NC-110NC.
Match your engine model to the list and the pump will fit without rework.
| Parameter | Value |
|---|---|
| OE number | 4655118 |
| Fits brand | Fiat; IVECO |
| TO Shaft head height | 149 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M8X1.25 |
| Flange thread | 3-M8X1.25 |
| TO Flange height | 126.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.42 kg |
| Packing | 4 pcs/ctn, 19.70 kg gross |
Depending on the catalog you use, the same pump shows up as:
For shipping estimates, count on 4 pumps per carton (19.70 kg, 41 x 36 x 19.5 cm).
Every pump leaves the line after a 0.1 MPa negative-pressure test. No leaks, no exceptions.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 4655118 fit?
4655118 fits FPT ARO 244, IVECO and other listed engines. It is a Fiat; IVECO application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 4655118?
4655118 interchanges with 4603885, 4616667, 4639182, 46545010, 4655010, 4655050 and 6 more. All of these refer to the same water pump assembly.
How much does the 4655118 water pump weigh?
One pump weighs 4.42 kg net. A full carton of 4 pieces comes to 19.70 kg gross.
What should I check before replacing the 4655118 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Bulk pricing starts at one carton. Ask for a quote with your target quantity.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.