Fiat water pump
- Interchanges
- 4616667 · 4639182 +10
- Engine
- FPT ARO 244
Photos of the actual unit — the same pump we measure and pack.
The OE number 4655054 identifies a water pump fitted to FPT ARO 244, IVECO and other listed engines. We supply a direct replacement built to the same shaft and pulley heights. One pump weighs 4.42 kg; a full carton holds 4.
Fitment covers FPT ARO 244; IVECO; 100EC-100NC-110NC.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
Depending on the catalog you use, the same pump shows up as:
| Parameter | Value |
|---|---|
| OE number | 4655054 |
| Fits brand | Fiat; IVECO |
| TO Shaft head height | 149 |
| Mounting hole position | Aligned to OE mounting points |
| Threads on the pump body | 4-M8X1.25 |
| Flange thread | 3-M8X1.25 |
| TO Flange height | 126.4 |
| Flange jumping | 0.07 |
| TO Impeller height Ⅰ | 1 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.42 kg |
| Packing | 4 pcs/ctn, 19.70 kg gross |
Each pump is packed individually; a master carton holds 4 pieces at 19.70 kg gross.
Air-tightness is checked pump by pump under 0.1 MPa negative pressure before packing.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 4655054 fit?
4655054 fits FPT ARO 244, IVECO and other listed engines. It is a Fiat; IVECO application water pump, and our aftermarket unit replaces it directly.
What other part numbers replace 4655054?
4655054 interchanges with 4603885, 4616667, 4639182, 46545010, 4655010, 4655050 and 6 more. All of these refer to the same water pump assembly.
How much does the 4655054 water pump weigh?
One pump weighs 4.42 kg net. A full carton of 4 pieces comes to 19.70 kg gross.
What should I check before replacing the 4655054 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
Message us with the OE number off your old pump. We reply with fitment confirmation and a price the same day.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.