Fiat water pump
- Interchanges
- 4603885 · 4616667 +10
- Engine
- FPT ARO 244
Photos of the actual unit — the same pump we measure and pack.
81863898 is the Ford OE reference for this cooling water pump. One pump weighs 4.20 kg net; match the number against your old pump or parts book before ordering.
You will find this pump on D8NN-8501NA; DEPN-8591A; Ford Tractor; 4400,4500.4600,4610; 5000,5600,5610,6600.
When in doubt, compare the old pump pulley height against our spec table below — it settles most fitment questions.
| Parameter | Value |
|---|---|
| OE number | 81863898 |
| Fits brand | Ford |
| TO Belt pulley height | 116.5 |
| TO Impeller height Ⅱ | 0.3 |
| TO Shaft head height | 123 |
| Pulley Jumping | 0 |
| Mounting hole position | Aligned to OE mounting points |
| Belt pulley thread | 4-5/16/24 |
| Air tightness testing | Leak-tested at 0.1 MPa negative pressure |
| Appearance Ⅰ | Neutral finish, no third-party logos |
| Appearance Ⅱ | Clean surface: no dirt, rust or paint peeling |
| Assembly rotation | Turns freely by hand, no sticking or noise |
| Net weight | 4.20 kg |
| Packing | 4 pcs/ctn, 19.00 kg gross |
Logistics data: 4 pcs/ctn, 19.00 kg gross, 58 x 44 x 21 cm.
We leak-test each unit at 0.1 MPa negative pressure, then spin it by hand to confirm free rotation.
Each pump is spun by hand before packing — it has to turn freely, with no sticking or bearing noise.
What vehicles or engines does 81863898 fit?
81863898 fits D8NN-8501NA, DEPN-8591A and other listed engines. It is a Ford application water pump, and our aftermarket unit replaces it directly.
How much does the 81863898 water pump weigh?
One pump weighs 4.20 kg net. A full carton of 4 pieces comes to 19.00 kg gross.
What should I check before replacing the 81863898 water pump?
Look for coolant seepage at the weep hole, bearing noise and pulley wobble on the old unit. Any of these means the pump is due; replace the coolant and check the belt at the same time.
How do I confirm 81863898 is the pump I need?
Check the OE number stamped on your old pump or in the parts book, then compare engine model and pulley height with the spec table on this page. If anything is unclear, send us a photo of the old unit.
Not sure this is your pump? Send a photo of the old unit and the engine tag; we will match it.
The inspection record travels with the carton. If a pump fails any check, it does not leave the bench.
Sealed and pulled to −0.1 MPa. No leakage detected, or the unit is rejected.
Turns freely by hand — no clamping stagnation, no abnormal noise.
No supplier logo, no dirt, rust or paint peeling on the casting.
Hole positions checked against the original for precise alignment.
The OE number is already in the email subject. Add your quantity and destination — we reply with unit price, MOQ and lead time within one working day.
No form to fill in. The OE number is already in the subject line — add quantity and destination port, and the desk replies within one working day.
sales@hanchitradecn.comOpens your mail app with this OE number filled in. Prefer to write from a different address? Send to the same mailbox.